[Resolu] Son bizzarre venant du disque dur

samedi 22 août 2015

Bon, maintenant qu'un peu de temps est passe et que j'ai eu l'occasion d'utiliser plus mon ordinateur portable (vu que j'etais pas chez moi ces derniers jours), j'ai verifie ce que smartmontools dit et j'ai ca :


# smartctl -a /dev/sda
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.16.0-4-amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, http://ift.tt/1mJlwo7

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Laptop Thin HDD
Device Model:     ST500LT012-1DG142
Serial Number:    S3PPE2LS
LU WWN Device Id: 5 000c50 0808e31f9
Firmware Version: 0001SDM1
User Capacity:    500,107,862,016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sun Aug 23 09:17:50 2015 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
          was completed without error.
          Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
          without error or no self-test has ever
          been run.
Total time to complete Offline
data collection:    (    0) seconds.
Offline data collection
capabilities:        (0x7b) SMART execute Offline immediate.
          Auto Offline data collection on/off support.
          Suspend Offline collection upon new
          command.
          Offline surface scan supported.
          Self-test supported.
          Conveyance Self-test supported.
          Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
          power-saving mode.
          Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
          General Purpose Logging supported.
Short self-test routine
recommended polling time:    (   1) minutes.
Extended self-test routine
recommended polling time:    ( 104) minutes.
Conveyance self-test routine
recommended polling time:    (   2) minutes.
SCT capabilities:          (0x1035) SCT Status supported.
          SCT Feature Control supported.
          SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   115   100   006    Pre-fail  Always       -       88320168
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       142
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   100   253   030    Pre-fail  Always       -       611194
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       47 (162 110 0)
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       84
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   073   054   045    Old_age   Always       -       27 (Min/Max 24/27)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       6
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       5
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       1493
194 Temperature_Celsius     0x0022   027   046   000    Old_age   Always       -       27 (0 22 0 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   100   000    Old_age   Offline      -       35 (118 84 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       198672882
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       125154686
254 Free_Fall_Sensor        0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        33         -
# 2  Short offline       Completed without error       00%        20         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
 


Ce qui fait pour 47 heures de fonctionnement un nombre de parcages de 1493 ; par rapport a avant (le premier test) ou j'avais pour 33 heures 1406 parcages. Je pense donc que c'est bon, le probleme est resolu (a moins que quelqu'un trouve un autre soucis lie au disque dur).
Au niveau de l'utilisation, meme en desactivant le parcage, l'autonomie de la batterie est assez bonne (j'ai pu bosser dessus pendant 2-3 heures avec une utilisation active du wifi, genre blog, videos, ssh et telechargement) et la reprise d'activite apres que le disque dur se soit arrete n'est pas genante.


Maintenant en ce qui concerne l'autre ordinateur portable avec le parametre "Advanced power management level" a 128 j'ai pour 31 heures de fonctionnement 589 parcages, ce qui me parait tout de meme eleve, donc je pense que je vais desactiver ce parametre pour voir si il y a une amelioration.


Merci pour tous les conseils.



[Resolu] Son bizzarre venant du disque dur

0 commentaires:

Enregistrer un commentaire

 

Lorem

Ipsum

Dolor